KC-DC - Part 1

Tools required:

Good Glue (and by Good, i mean the type of glue?)

Blade

Parts required:

2x Signo tips

2x Bic round stic (plastic) tips

2x Ink tubes (For pen version)

Grips of your choice

1x Bic round stic barrel

2x Ballsign Caps

For the mechanical pencil version, I used a mech like this:

So those are the pens! Yay! =D

Now for the parts...

Just get your grips and your Ballsign caps plus the other "loose" stuff in the picture

Now take the bic tips and cut ~1.7cm measured from the back

Take the cut tip and put glue around the tip

Put a signo tip over the glued tip and repeat on other bic tip (unless you want to make the MP version)

If you're making the pen version, take your ink tubes and put glue around the area that would be inside the bic tip

Then put the ink tubes into the tips

Now you can attach them to the bic body like a bictory

See part 2 for caps & MP version~